Pitch-to-Flat Roof Junction Lead & Felt Repair – Wolverton
A Quality Construction project in Wolverton: Pitch-to-Flat Roof Junction Lead & Felt Repair – Wolverton. The vulnerable pitch-to-flat junction was properly closed and weathered.
Background
Starting point
The customer wanted a reliable, properly finished solution at the property in Wolverton. The starting point was large gap where the flat roof met the pitched roof. The priority was to correct the issue properly and leave a durable, professional finish.
Existing condition
Large gap where the flat roof met the pitched roof. The existing construction and surrounding details were assessed so the scope could focus on the areas genuinely requiring attention.
Challenges
The main consideration was integrating the new work correctly with the existing property while maintaining weathering, finish and build quality. No unusual additional challenge is recorded for this historic project.
Photography
Delivery
What we did
- Installed a new lead detail at the junction and integrated/sealed it with the mineral-felt roof covering.
Programme
Work stages
Inspection & preparation
Assess the existing substrate or prepared deck, remove failed material where required and clean the area thoroughly. QC focus: preparation, correct sequencing and quality of the inspection & preparation stage.
Repairs / build-up
Complete any structural, deck, DPM, insulation or upstand work required before waterproofing. QC focus: preparation, correct sequencing and quality of the repairs / build-up stage.
Waterproofing installation
Install the specified EPDM, single-ply or liquid-applied waterproofing system with careful detailing around edges, outlets and penetrations. QC focus: preparation, correct sequencing and quality of the waterproofing installation stage.
Trims & interfaces
Complete perimeter trims, wall details, fascias, gutters or adjoining roof interfaces. QC focus: preparation, correct sequencing and quality of the trims & interfaces stage.
Final inspection
Check continuity, laps/details and the finished appearance, then photograph and leave the area clean. QC focus: preparation, correct sequencing and quality of the final inspection stage.
Specification
Products & materials
Lead sheet
Selected for durable traditional weathering at roof junctions, abutments, valleys, chimneys or outlets.
On site
Problems solved
Issue
The main consideration was integrating the new work correctly with the existing property while maintaining weathering, finish and build quality. No unusual additional challenge is recorded for this historic project.
How we fixed it
Quality Construction recommended a targeted, properly prepared installation rather than a temporary cosmetic repair. The agreed approach was to installed a new lead detail at the junction and integrated/sealed it with the mineral-felt roof covering. with attention to preparation, detailing and long-term performance.
Outcome
The vulnerable pitch-to-flat junction was properly closed and weathered.
Standards
Planning, quality & handover
Quality control
Quality checks focused on preparation, alignment, weathering/detailing, fixings and the finished appearance relevant to this pitch-to-flat roof junction lead & felt repair – wolverton. Photographs should be used to evidence visible and hidden-stage workmanship where available.
Project management
The works were organised around a planned sequence and completed over Half a day. Materials, access and individual work stages were coordinated so the project could progress efficiently with minimal unnecessary disruption.
Outcome
The result
The vulnerable pitch-to-flat junction was properly closed and weathered.
